Products DIY Hub Experience Peak Team PEAK Peak Info
  • About
  • Peak Solution
  • FAQ
  • Back-up Camera - 3.5 inch

    We’ve got your back—with the ultimate, easy-to-install vehicle back-up camera.

    Find a Store


    The PEAK® 3.5” Wireless Back-Up Camera is a safer way to back up. It comes with a 3.5” LCD color monitor, which securely affixes to your windshield with suction cup mounts for easy-to-see rear coverage. A water resistant color camera attaches to the back of your ride’s license plate for complete rearview coverage, and a 2.4 GHz wireless transmitter installs on most vehicles in just minutes. It’s perfect for cars, SUV's, trucks, RV's and for towing boats or campers. A 12V DC Power Cord and all mounting hardware are included.
    Specific features include:

    • Water resistant camera - IP 66 – Water resistance rating
    • Wireless transmitter
    • Adjustable Arm with Suction Cup
    • Standby with Auto ON Mode when camera is ON
    • Water Resistant Camera with:
        • Wide 100 Degree Viewing Angle
        • Camera Mounts to License Plate
    • Installs on Most Vehicles in Minutes

  • We’ve got your back—with the ultimate, easy-to-install vehicle back-up camera.

    PEAK® Wireless Back-Up Camera Systems are perfect for cars, SUV's, trucks, RV's and for towing boats or campers. Large full LCD Color Monitors and water resistant color cameras install on most vehicles in just minutes to provide complete rear view coverage.

  • Digital Back-up Camera- 3.5 inch

    Question: My camera will not communicate with my monitor. How do I restore communication?

    Answer: Your camera may need to be paired with the monitor to restore communication. See below for instructions.

    Pairing camera with monitor:

    To pair camera with monitor, make sure the parking brake is applied, turn the ignition switch to the ON position (do not start the vehicle) and shift the vehicle to reverse.

    NOTICE: In extremely bright conditions, the screen image may take a few seconds to stabilize. Wait until the image has stabilized before backing up.

    1. Press the menu button to bring up the settings screen.

    2. Use the up and down arrows to highlight any icon.

    3. To select any icon, press and release the ON/OFF button. (To go back, at any time, press the menu button.)


    Select this icon to pair camera with monitor (establishes/restores communication).

    NOTE: This feature should ONLY be used in cases when there is no communication   between the camera and monitor. Camera and monitor come from the factory already paired.


      To pair camera with monitor:

      1. Select camera 1. Pairing hourglass logo will show in monitor for 22 seconds.

      2. Within this 22 seconds of time, press and hold camera pairing button on underside of camera for at least 3 seconds. Camera and monitor will be paired. Once paired, camera and monitor will pair automatically each time the system is turned on.

    To unpair camera, press and hold the down arrow for 20 seconds. This symbol indicates the signal is too week or signal is disconnected.


  • Back-up Camera - 3.5 inch

    OLD WORLD INDUSTRIES, LLC warranties this product against faulty manufacture and defective materials. OLD WORLD INDUSTRIES, LLC. will not accept product liability for application or use of this product.

peak force racing