Products DIY Hub Experience Peak Team PEAK Peak Info
Product

SPECS

MSDS

  • About
  • Peak Solution
  • Warranty
  • 2-Cycle Engine Oil

    PEAK® 2-Cycle Engine Oil delivers improved engine performance and dramatically reduced engine wear. PEAK® 2-Cycle Engine Oil is specifically designed for use in motorcycles, outboard motors, snowmobiles, chainsaws, jet skis and other fuel-lubricated or fuel-injected, pre-mixed or oil-injected, 2-cycle gasoline engines requiring Jaso FB or TC-3 specifications. PEAK® 2-Cycle Engine Oil is a certified TC-W3 Lubricant by the National Marine Manufacturers Association (NMMA®). PEAK® 2-Cycle Engine Oil effectively reduces engine heat, wear and emissions. It also helps:

          • Prevent ring stick and piston scuffing
          • Keep spark plugs and exhaust ports clean
          • Resist spark-plug fouling
          • Deliver excellent low-temperature performance

    PEAK® 2-Cycle Engine Oil TC-W3® is also formulated to mix quickly with leaded or unleaded gasoline and it pumps easily in low-temperature environments. For best results and engine performance, follow engine manufacturer's recommendations to determine correct oil/fuel ratio. Then just add it to the fuel and mix thoroughly.

  • Reduces engine wear and promotes spark plug and exhaust port cleanliness.

    Our complete selection of PEAK® Motor Oils are formulated with high-quality petroleum base stocks and fortified with advanced additive technology. These advanced additives are consumed by the vehicle's engine over the course of the oil's lifespan or drain period. As the oil performs its job of trapping combustion's harmful by-products it gradually becomes less efficient and effective. That's why oil must be changed on a regular schedule and why an oil change is one of the most important, and easiest, vehicle maintenance tasks.

  • 2-Cycle Engine Oil

    Reduces engine wear and promotes spark plug and exhaust port cleanliness.

    Limited Warranty In the unlikely event that a PEAK® Motor Oil customer suffers vehicle component damage as a result of the use of a PEAK® Motor Oil product, Old World Industries, LLC. ("Old World") will pay the cost of necessary repairs (subject to the maximum claim amount set forth below) provided that the PEAK® Motor Oil product was used as recommended by the vehicle manufacturer and by Old World and that the damaged component was maintained in accordance with the manufacturer's recommendations. Proof of proper maintenance of the damaged component and use of the PEAK® Motor Oil product will be required. Customers who claim to have suffered vehicle component damage as a result of the use of a PEAK® Motor Oil product must provide a sample of the PEAK® Motor Oil product actually used in the damaged vehicle component for testing purposes. Any damaged vehicle component must be available for inspection. This limited warranty ("Warranty") is the only express warranty that applies to PEAK® Motor Oil products and sets forth all of the obligations and responsibilities of Old World. Any and all applicable implied warranties are limited to the terms, conditions and duration of this express Warranty. All other warranties, express or implied, are specifically disclaimed. Old World shall not be responsible or liable for any amount of damage in excess of an approved repair estimate (in Old World's sole discretion) and in no event will any claim payment be made in an amount exceeding $1,000.00. Incidental, consequential, special or punitive damages, including any claims for lost profits, are specifically excluded from coverage under this Warranty. STATE LAW RIGHTS: THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

×